Sign stand buyer's guide
Sign Stand Buyer's guide

Sign Stands:

Click images below for closeup view Click images below for closeup view

Super Buster Super Buster - Open Base
Super Buster (65000 Series)
Approved with Roll-Up and Safe Sign-350 Signs at any height and with .080, .100 and .125 Aluminum or 5/8" Plywood signs at 7' bottom height.

The Super Buster Sign Stand has a powder coated steel base and two heavy duty springs, designed to withstand strong winds and severe wind gusts created by passing traffic. Both the lightweight aluminum mast and legs telescope for compat storage and site specific adjustments.

Super Buster can accommodate a 48" x 60" and 48" x 48" or smaller 5/8" plywood signs, or .080, .100, .125 aluminum, plastic or roll-up signs up to 7' off the ground.

Super Buster also comes complete with TrafFix Step-N-Drop leg release system found on all TrafFix 4 legged Sign Stands. A two position leg adjustment allows all four legs to be individually adjusted for uneven terrain. The built in Flag Bracket will accept up to three 3/4" wooden or plastic dowel flags.

12" Barrier Buster Clamp with Little Buster Springs and Mast
3 holes will accept Little Buster and Big Buster Springs and most other manufacturers springs and components
T-Pins with hardened steel points secure stand to concrete barrier wall
Barrier Buster (29000 Series)
With Concrete Barrier Clamp
  • Ideal for highway conditions where should space is limited
  • Durable powder coated steel clamp with heavy duty T-pins and hardened steel points
  • 12" clamp fits 5 1/2" to 12" wide Jersey-style concrete barrier walls
  • 15" clamp fits 8 1/2" to 15" wide Jersey-style concrete barrier walls
  • Available as clamp only, with Little Buster (steel) or Big Buster (aluminum) mast, springs and signs mounted brackets
  • Barrier Buster clamp will accept most other manufacturers dual vertical coil springs and stand components.
  • Safely displays 48" x 48" or smaller; rigid or roll-up signs
  • Designed for quick and easy setup and removal
  • Perfect for short term applications

Model # D1101LY
Model # D1101LY
Big Buster (60000 Series)
Tested and certified to meet the crashworthy requirements of NCHRP-350 with Roll-up signs, Safe Sign-350 at any height, and with .080 Aluminum or Plywood signs at 5' bottom height

The Big Buster sign stand has a steel base and two springs so it can withstand heavy winds as well as severe wind gusts and air currents created by passing trucks. The legs and telescoping mast are made of lightweight aluminum to reduce carrying weight.

Big Buster is designed to hold wood or .080 aluminum signs 5 feet off the ground. It can also be used to hold a roll-up sign 7 feet off the ground.

Big Buster comes with the same Step-n-Drag leg release system found in the Econo Buster, Little Buster and TrafFix Stands. A two position leg adjustment allows all four legs to be individually adjusted for uneven terrain. A built-in bracket holds up to three flags with wooden or plastic dowels

Econo Buster sign stand with 36"x36" roll-up sign Econo Buster sign stand fold for compat storage <br /> Shown with roll-up bracket
36"x36" rigid sign and brackets wit flag holder
Econo Buster (80000 Series)
Tested and certified to meet the crashworthy requirements of NCHRP-350 with Roll-up signs, Safe Sign-350 plastic signs and with the Safe Sleeve-350 Bracket for .080 Aluminum Signs.

Econo Buster is a lightweight (30lbs) yet durable stand for 36"x36" and 48"x48" roll-up or rigid signs. The telescoping inner mast allows all types and sized of signs to be mounted at various heights. The poser coated paint on the steel legs and telescoping mast resists rusting. The step-n-drop leg design enable you to set up quickly without having to bend down or stoop over *no point to kick, push or pull). The three positions locking leg design allows you to adjust for uneven terrain.

Little Buster sign stand with 48"x40" rigid sign and two flags Model # D1101LY
Model # D1101LY
Little Buster (24000 Series)
Tested and certified to meet the crashworthy requirements of NCHRP-350 approved with 48"x48" roll-up, (.080, .100, .125 aluminum), 5/8" plywood and plastic Safe Sign 350 signs, additional sign sizes approved. (Safe Sleeve 350 required for plywood and aluminum signs).

Little buster Sign Stands is designed to hold 30", 36" and 48" aluminum, wood, plastic or roll-up signs. All steel construction with power coated paint to resist rusting. Telescoping mast with adjustable rigid or roll-up sign brackets allow for variable sign height adjustments. Dual spring mounted base for added stability during high winds. Step-n-Drop legs enable you to set-up in seconds without having to bend over or stoop down. A two-position leg adjustment allows all four legs to be individually adjusted for uneven terrain. Flag holder will accept 3/4" diameter wooden or plastic down flags.

Little Buster "Two Step" Instructions

Displayed with sign Folded Tri-Buster Stand - Dimensions: 4.5"W x 3.25"D x 53"L
Tri_buster optional Roll-Up Sign Bracket
Tri-Buster Leg Extending Leveling Kit
Tri-Buster (93000 Series)
Tested and certified to meet the crashworthy requirements of NCHRP-350
  • The Tri-Buster Tripod Sign Stand is the ideal combination of durability, economy, safety, and versatility. perfect for the needs of many contractors, municipalities and utility companies.
  • Constructed of corrosion resistant heavy duty galvanized tubing for long life at an economical price
  • NCHRP 350 approved with 48"x48" or smaller/ plywood, aluminum, aluminum poly laminate, plastic, and toll-up sign material
  • Three leg design is very stable in windy conditions. Ballasting hook allows sand bags or weights to be hung form sign stand for added stability
  • A built-in 3-flag hold secures 2 or 3 standard 3.4" wood dowel flags abode the sign
  • Safety engineered with guards to protect fingers from dangerous "pinch points"
  • Optional Roll-up sign bracket and leg extending leveling kit may be ordered to enhance Tri-Buster's performance
  • Compact design allows Tri-Buster to be folded so that it stores in minimal space

TrafFix Sign Stand

TrafFix Sign Stand with Unique Step-n-Drop Leg (22000 Series)
This highly advanced Step-n-Drop feature enables you to quickly set-up the stand without having to bend over or stoop down. Simply place your foot on the release lever, step down and two legs will drop into position. Repeat the process for the remaining two legs and you are ready for the sign.
Step on both levers on botton of stand
Step on both levers on botton of stand The stand is compact, easy to carry and stores in a small space. All parts can be easily replaces. A complete parts list is included with each stand.
TrafFix stand's tip resistant design effectively spills the wind and hold a 36" x 36" or 48" x48" roll-up sign securely without heavy springs or a bulky mast.
TrafFix stand shown on right with 36"x36" mesh sign and flag assembly
The telescoping legs create a wider stance for added stability in high wind situations. Just pull legs out when needed, and return legs back to original position for storage.
The stand can also be adjusted to 3 height levels, depending on your particular situation. Each leg can be independently adjusted for greater stability on uneven terrain.

TrafFix Stand with Spring
TrafFix Sign Stand with Spring (22300 Series)
For those extra windy applications, TrafFix Devices introduces an all new single spring sign stand. The stand has Stop-n-drop legs and all the other features and benefits listed above. The stand comes with the traditional latch bracket connector for plastic corner pockets, or the universal sign holder which is ideal for sewn corner pockets and other manufacturers roll-up signs.

TrafFix Sign Stand with Spring and Aluminum Legs
TrafFix Sign Stand with Spring and Aluminum Legs (22700 Series)
This aluminum leg version of the TrafFix sign stand with spring is ideal for those applications that require lightweight, corrosion resistant aluminum. The longer legs provide added stability in windy conditions.

Rigid Sign Adaptor
Rigid Sign Adapter
This single spring adapter converts a TrafFix stand for roll-up signs into a stand that will accommodate a 36"x36" rigid signs. Simply drop the custom latch bracket connector into the sign stand to lock in place.

Ground Mount Stand
Ground Mount Stand
This economic stand is ideal for short duration jobs. Simply drive the pointed metal end of the stand into the ground by stepping on the horizontal side bars. Holds 36" or 48" roll-up signs firmly in place (works best in loose soil, sand or gravel).